A faulty toilet can be wildly frustrating. This is especially true if there is only one toilet in the residence. In a situation where you can't quickly remedy the problem on your own, you'll want to call in a reputable plumber who will promptly arrive and get your bathroom back to normal as soon as possible. Here's a look at six common signs of a failing toilet.
Weak Flushing
If the toilet only flushes a small amount, then there's a strong likelihood that the flushing mechanism needs to be repaired.
Tank or Bowl Doesn't Refill
When a tank or bowl won't fill back up, the culprit is often a faulty fill valve. In such a scenario, valve replacement is usually needed.
Crack in Tank or Bowl
If the crack is smaller than 1/16th of an inch, then it can likely be repaired with a plumber's epoxy. However, larger cracks often necessitate toilet replacement.
Won't Stop Running
A continuously running toilet could mean that a flapper valve adjustment is necessary. But if that doesn't work, then your flapper may need to be replaced.
Water Accumulating at Toilet Base
This is indicative of a leak at the seal. It's possible that this can be remedied by simply tightening up the bolts that hold the toilet to the floor. Another possible solution is installing a new wax ring to completely seal the toilet/drain pipe connection.
Rust/Corrosion
If the rust is in a small area of the toilet, then you might be able to get away with just replacing the pertinent part. However, if the rusting is more widespread, then there's a good chance that you'll want to install a new toilet.
If you need toilet repair, be sure to get in touch with a reputable plumber. For toilet repair in Kingwood, Atascocita, Humble, Summerwood, and The Woodlands, TX, contact the experts at Gap Plumbing at (281) 645-5406. Feel free to call Gap Plumbing for any of your residential or commercial plumbing needs!